Commissioned Tzeentch Chaos Lord WIP #2

 Well, now that I've got some things squared away with the figure, I can post some pictures. The first thing (and main picture) is that I've got him stripped down to his bare minimum, more or less, and everything from here out will be building him back up - you know, kinda like Steve Austin?


 There was an accident of sorts with this guy - I don't know how many people are necessarily familiar with the model (since looking for reference pics online, he doesn't seem to be all that "popular"). Essentially, he's attached to the tab at the bottom by his chain and a replica "spiked backpack skull top," meaning the only thing keeping him stuck in a slottabase and upright is about the width of the slottabase tab - not even, actually. In transit or movement or maybe just my absent-minded ignorance, he must've been getting bent back and forth to weaken the join with the tab, because when I went to "unglue" him from the base with some acetone he simply sheared off at the tab.

 I had a chance to talk with the customer about this and my potential plans as to how to resolve it (various methods of pinning, pretty much) and clarified some things so far as the conversion, so with the figure stripped down at this point, I'm basically good to go.

Oh, and the color scheme is more or less decided:
Tutankhamun_MainPicture.jpg
Tut_coffinette.jpg
falcon_03.jpg
800px-AncientEgyptianMummy-Antjau-CloseUp.png


 I'll post more later, but right now I'm headed up to the hospital ER with my wife to get a CAT scan of her gastrointestinal system - she's been getting violently ill any time she eats anything substantial. The kids are at my parents, the animals all have food and water, and I'm geared up for a lengthy wait...

 I've not been able to find any myself, but does anyone know of any examples of the Chaos Raptor Lord figure pinned to scenery or anything - something other than based with the chained skull, in other words?

Hobby Tip - Basing

I like 'em cheap and easy! ... Figure bases, that is.

 Today's Hobby Tip focuses on basing. Whether it be for rank and file army models or for competition entries, such as Games Workshop's Golden Demons, the base is an integral part of the overall "atmosphere" of the figure; that said, despite being fairly important compositionally, that does not mean you need to spend large amounts of money to get reasonable-looking basing. Since getting into miniature painting again several years back, I suppose I've generally been of the opinion that unless I necessarily need to go out of my way for some fancy name-brand product or expensive, spectacular method that I absolutely have to use in order to get a certain appearance or end result, by and large I prefer to do it with cheap and readily-accessible "substitutes." Tools are one thing I don't skimp on: Kolinsky Red Sable paintbrushes, assorted stainless steel needle files in a number of shapes, assorted angles of side- and end-cutters (with some specifically set aside for rough work like sprue- and wire-clipping, and some for fine conversion), a variable-speed Dremel with a ton of attachments and bits, general workshop tools (band saw, router, jigsaw, scroll saw, pyrogravure, etc.), an overhead adjustable daylight painting lamp - I'm sure you get the picture.


 I've pretty much used the same materials for basing since starting back in the hobby, and you can see them laid out in the background of the picture above: (from left to right) "ant dirt" and small rocks taken from outdoors, clean non-clumping clay kitty litter, wood glue (aka PVA glue), cornmeal, and bits of extruded polystyrene insulation foam left over from other projects. In the foreground, you can see an assortment of bases themselves - they all use the same materials, with the addition of a few "found objects" in the case of the Ork Nob's base, some shaped lengths of sprue and clipped paperclip segments on the Genestealer Patriarch base, tinted Future Floor Finish and clippings from a $0.99 wall edging brush on the base of the Privateer Press Deathripper, and on the bases of the Necron constructs, um... I guess the only inexpensive oddity there would be the 0.3mm music wire holding up the Scarabs (I've never liked clear plastic flying bases or the built-in risers for Scarabs, so I made my own variable-height ones).

 For clarification's sake, what I call "ant dirt" is the ultra-fine to small-grade grit that the ants living between the blocks of my driveway were nice enough to gather, process, sort, and collect for me every summer. Aside from picking out the occasional tiny piece of grass or plant material as I use it (personal preference there, I suppose), it goes straight from a backyard ant mound to the container, and then right to figure bases with a bit of glue. I find it's excellent for anything where I need extra-fine grit or minor texturing (and have gone so far as to "paint it" using thinned wood glue straight onto basing or even models, especially if I want a rusty or muddy texture). The overall mixture from the tub is great for mixing amongst larger pieces rubble or scree in order to fill in gaps, or even just applied to a base as-is to simulate uneven rocky/sandy ground cover.

 The cornmeal is pretty straightforwards: it comes in a large can from the grocery store, is pretty much a uniform grain size (slightly larger than the finer ant dirt), is already dried out so I needn't worry about mold growth, and is somewhat moisture absorbent so it dries nice and compactly on a base when spread over already-applied thinned wood glue. It also clumps naturally when wet, and so is good for effects like "built up" texture for footprints or wind-blown debris (basically, when mixed with a little thinned wood glue to thicken it up, I can apply it like a "paste" and push it around with an old brush. I use corn meal on the majority of my basing, by and large, just because it's so versatile; generally I apply it straight on with thinned wood glue.

 The clay kitty litter is good because it comes in a variety of "natural" fine-scale rock shapes, can easily be broken into smaller particles or filed down to weird angles for effect, and is probably the cheapest material in bulk out of the lot. Even a small bag of cat litter should last ages and ages. It makes for great fine-scale rubble, miscellaneous debris, rock piles, and even broken concrete depending on the shape and size of the pieces used.

 The wood glue in the picture has lasted me quite a while (yeah, it's Elmer's) and is slightly more durable, in my opinion, than regular household white PVA craft glue (probably Elmer's also) and a helluva lot cheaper than the repackaged stuff some companies sell at a profit for modeling (again, probably Elmer's as well). It comes in much larger containers than white PVA glue and (don't quote me) is cheaper because it isn't bleached/doesn't have the whitening agents added to household glue in order to make it "pretty." It dries clear and rock hard, and doesn't leave any more of a "footprint" than CA glue, even.

 Extruded polystyrene insulation foam (pink foam, blue foam, EPS foam) is fairly easy to come by in most areas that have warmer temperatures. You can buy it in bulk in large sheets from home improvement/DIY stores (mine was originally 4' by 8' but got broke in half over my knee when it became belligerent about fitting into the hatchback) and is more or less equal in hardness and consistency, regardless of color. (Pink = Home Depot, Blue = Lowe's Home Improvement, and a large 1" thick sheet that's cheap per square foot and can be squirreled away in the garage rafters until needing to get a chunk cut off for a project = pure win!) Yeah, you could go even cheaper and use the white polystyrene that comes boxed with new "toys" as a "shock absorber," but that stuff is a rougher texture, has a larger "grain," and just isn't as convenient to store as a large flat sheet. (Remember I said I generally go cheaper when possible but buy "quality" when I need to - this is one of those instances.) So far as uses: the small off cut chunks like what you see here make great rocky debris, especially with a little texture added. They're also good for use underneath other basing material, such as the "mound" on the base of the Genestealer Patriarch from my picture.

A few asides:
 I've personally never used static grass on any of my based miniatures (although I bought a small tub of it some months back when I finally found a brand and shade that didn't have any extra odd colors mixed throughout), but I think I still manage to get a reasonable variety of base appearances - that's why it's not on my short list here.

 So far as display/competition pieces go, I've generally used the same style and materials in basing those as I do for "less fancy" figures. I still like to make a good presentation and get across a certain "atmosphere," though, so by and large I've made small-scale "dioramas" with insets to match the basing of most of the models I've entered in painting competitions. My Golden Demon entry at the Games Workshop 2007 Chicago Games Day for example, Gandalf at the Bridge of Khazad-Dûm, was converted and reposed in attempted replica of the "challenging the Balrog" scene from "The Fellowship of the Ring" movie, with the figure atop a 15" long span made from pink insulation foam, Spackle, fine grit, and a reinforcing wood dowel.

 I'm sure I'll probably make a fancy multilevel display base at some point - I just haven't yet. The "fanciest" I've gotten so far has been a round 1 1/2" tall resin display plinth with a piece of trimmed-to-shape metal air duct sheeting flush with the top. It had the edges deburred and rounded down with a bastard file (I love that name!) so it can be used - even held upside down - with any of my figures where I've epoxy glued rare earth magnets underneath (so far pretty much all of them).


 Hopefully I've gotten across the idea that if you are so inclined you can have basing for your figures that looks good with a little creative use of inexpensive and readily-available materials. I'd appreciate any feedback or other comments on figure basing that people care to throw my way - what do the rest of you use?

Selfish? Maybe, but I've never had a blog before...

This might be totally selfish, but I'm the only one doing the writing around here and I feel like asserting my self-promotional authority: Happy Birthday to me! Here's hoping this year will be better overall than last year.

In other news, conversion and prep work continues on the Thousand Sons Chaos Lord. I'll post pictures and discuss the overall "plan" a bit more after I've had a chance to kick some ideas around with the customer.

Working on a Tzeentch Chaos Lord Commission

 I recently started working on a commission for a Tzeentch Chaos Lord figure for a Thousand Sons army, and figured since I haven't really posted much in the way of work-in-progress entries here on Painting by Tinweasel, I'd start things off on this guy with as bare-bones as it gets - more or less what the customer handed over after discussion of the "tentative" final version. No pre-cast resin bases (from a near-to-opening online business elsewhere), no dramatic poses (necessarily), and no diorama-style basing - just a suitable tabletop army leader painted (and converted, even, as things have worked out) to a display quality. I've also never had the opportunity to paint any of the old "official" Chaos Marine Legions, and the Thousand Sons definitely have character in abundance.

The rough design: essentially what the customer gave me at the start:


 What the customer is looking for is a Tzeentch-allied Chaos Lord w/ wings and a Daemon Weapon to lead his pure 'Sons army. The swapped-out pieces are to represent his Daemon Weapon meshed with one arm and a mutated close combat weapon on the other - I'll be making some adjustments to both arms to tie things together, and my suggestions seem to have been well-received. We likewise both agreed that an improvement on the current standard Thousand Sons Rubric Marine head would be good, with the understanding that the whole figure still fits the Thousand Sons theme - we discussed options, and I've got the go-ahead to model something I have in mind that ought to fit the bill nicely. I also suggested that the current figure is apparently lacking some sort of ranged weapon in terms of "what you see is what you get" and that with some additional conversion and sculpting that would tie together with the current planned appearance, he could be plainly and obviously game legal while allowing me to do a little additional sculpting. Other than the agreed-upon requirements, the customer has more or less given me free rein otherwise, so I'm going to get creative with this guy (within reason, of course).

 The agreed-on color scheme should look like a darker version of the standard Games Workshop Thousand Sons Legion colors, while using analogous and complementary shades for the additional parts. I'd like to try some new effects with zenithal/ambient lighting, given the figure's posing, and am really looking forwards to the planned sculpting and additions to the base model. I've not had a chance to paint any Thousand Sons troops yet (nor Raptors, for that matter), but I'm really looking forwards to working on this. (Did I mention that other than the agreed-upon requirements, I've more or less got free rein from the customer to work on this guy with whatever comes to mind and fits with the overall theme? Yee-haw!)

Hobby Tip - Making Raised Details

 One way to achieve fine, raised detail on a figure (short of natural sculpting talent) is to get creative with alternative materials. Sort of like what scrapbookers do with stamps, ink, and embossing powder, a similar, raised effect can fairly easily be accomplished with a fine-grain natural desiccant, such as talc, baby powder (same thing, only scented), or corn starch (same thing, only organic- and not mineral-based) - essentially you want something like these both for their moisture absorbing properties and their fine consistency.

 Using thinned-down PVA glue and a brush, you can essentially "paint" a design, shape, or pattern onto a miniature and then sprinkle on a small, precise amount of your talc over the wet lines or shapes. The moisture in the glue will be absorbed by the powder, which will "bloat" slightly over your added design - if you do this in small amounts or over small areas, you shouldn't have to worry too much about evaporation or your glue firming up before you've finished. When completely dry, your new raised detailing will be permanently set by the glue. I've been using this process in a modified manner for building up ground cover on scenery lately, the primary difference is that I've been using materials with a larger "grain" - you could apply multiple applications of this process if you want variable heights or a final result that is noticeably raised from its base surface, but an easier method might be to use something with a slightly larger "grain" for an underlying layer and then smooth out and blend in the outer surface with thinned PVA glue and a desiccant powder. Any leftover powder will easily clean up when you wash your figure before priming, and should be set firm enough to avoid being rubbed off by a gentle rubbing/scrubbing.

 The only reason I would recommend PVA glue (or thinned Future Floor Finish, alternatively) over something like CA glue is primarily the aspect of drying time - PVA glue sets much slower - but also the ability to accurately "paint on" the design you want added to a figure. Some CA glue bottle applicator tips are small, but don't have quite the level of accuracy (or ease of quick removal if you make a mistake) as a fine brush point. If you want something quick and easy, like lined scarring or patchy, leprous skin, and aren't so concerned about precision in the manner that a unit insignia would need, then CA glue ought to likewise work excellently.

Hobby Tip - Cuticle Stones

 I would highly recommend the purchase of a readily available and fairly inexpensive product for use in prepping miniatures, bases, sculpting, resin, and other decorative bits with your figures - unorthodox as it might sound, a common (and I can't believe I'm linking to this sort of site for an example) cuticle stone. They're known by lots of names, and I'm sure you can readily find one at a local pharmacy, druggist, general goods store, manicurist's shop, or salon.

 Essentially, when wet, cuticle stones work like automotive grade wet-dry sandpaper in stick form - I'd wager 600+ grit, maybe more like 800. In other words, this isn't something you'd want to use as your primary tool for filing/sanding of miniatures or scenery materials, but it does a great job at smoothing rough edges, taking things down in tricky hard-to-reach areas, and burnishing. The cuticle stone I've got is shaped like the one I linked to on the beauty supplies website (above) - essentially like a squared-off bullet, with a rectangular body that curves on two faces to a somewhat rounded not-quite-30­° angle straight end. So far, I've used it to get a baby-smooth burnished finish on the skull helm of a former white metal Khorne Lord now-Undivided after Dremeling off his "antlers"; stripping the multiple mold lines off of my somewhat soft resin Forge World Renegade Psyker without leaving score marks like a metal file would; adding scoring, gouges, and scrapes to resin basing and chunks of broken resin "concrete" using the right-angles of the rectangular body; and general purpose (but not heavy-duty) filing and smoothing. The nice thing about my cuticle stone is that it's got rounded curves, a broad angle, and 90° corner sanding all in one package.

 I'd recommend picking one up to anyone, just to see how they handle - let me know what you think.

Best Laid Plans o' Mice an' Men Gang Aft A'gley

I was planning on doing a simple basing demonstration using very cheap and easy-to-get-ahold-of materials today, but about 1pm yesterday we had a power outage in our entire neighborhood due to a "blown fuse" (the actual phrasing was much more technical) on the part of the power company.

Needless to say, my plans have kinda changed. My wife was nice enough to let me borrow her laptop for five minutes - yay for her!

We will return you to your regular broadcasting as soon as you (we) are groovy...

Colors!

Key: GW = Games Workshop/Citadel Colour paint, VMC = Vallejo Model Color paint, VGC= Vallejo Game Color paint

Crimson Red:

• Basecoat 1:1 GW Red Gore/GW Scorched Brown at 1:1 paint/thinner consistency


• Draw out 1:3 GW Blood Red/thinner towards edges and highlight areas


• Extreme edge highlight 1:4 GW Blazing Orange/thinner, drawing higher concentrations of color towards uppermost areas

Rich Burgundy:

• Basecoat 1:1 GW Scorched Brown/GW Red Gore at 1:1 paint/thinner consistency


• +1 drop of GW Red Gore, with mixture at 1:4 paint/thinner consistency drawn out starting roughly 1/16" from shadowed areas


• +1 drop of GW Red Gore, with mixture at 1:4 paint/thinner consistency drawn out starting roughly 1/8" from shadowed areas


• +1 drop of GW Blood Red, with mixture at 1:4 paint/thinner consistency blended into upper-facing areas


• Highlight with +1 drop of GW Blood Red, with mixture at 1:4 paint/thinner consistency blended out to about 1/8" away from top of upper-facing surfaces


• Extreme edge highlight with +1 drop of GW Blazing Orange, with mixture at 1:4 paint/thinner consistency


• Several glazes of 1:1 GW Black Ink/Red Gore at 1:30 paint/thinner consistency primarily focusing on edges/crevices

High-contrast Yellow:

• Basecoat GW Skull White


• Wash/glaze with 1:10 GW Fiery Orange/thinner


• Glaze 1:10 Yellow Ink/thinner + 1 drop Fiery Orange


• Draw out 1:1 GW Sunburst Yellow/VMC White at 1:4 paint/thinner consistency toward edges and highlight areas


• Extreme edge highlight 1:2 Sunburst Yellow/White at 1:4 paint/thinner consistency

Low-contrast Yellow:

• Basecoat 1:2 GW Tausept Ochre/thinner


• Layer 1:4 GW Golden Yellow/thinner


• Highlight 1:4 GW Sunburst Yellow/thinner


• Extreme edge highlight 1:1 Sunburst Yellow/White at 1:4 paint/thinner consistency

Mid-range Blue:

• Basecoat 1:1 GW Ultramarine Blue/thinner


• Wash with 1:10 GW Chaos Black/thinner


• Draw out 1:4 Ultramarine Blue/thinner toward edges and highlight areas


• Highlight 1:1 Ultramarine Blue/VMC White at 1:4 paint/thinner consistency


• Extreme edge highlight 1:2 Ultramarine Blue/White at 1:4 paint/thinner consistency

Black:

• Basecoat 1:1:2 GW Chaos Black/GW Codex Grey/thinner


• Wash with 1:10 GW Black Ink/thinner (or 1:8 Chaos Black/thinner, or Badab Black brushed towards depressions and shade areas)


• Highlight 1:1 Chaos Black/GW Codex Grey at 1:4 paint/thinner consistency


• Extreme edge highlight 1:4 Codex Grey/thinner

Simplified Black:

• Basecoat 1:1 GW Adeptus Battlegrey/GW Black Ink


• Extreme edge highlight 1:4 Codex Grey/thinner

White:

• Basecoat 1:2 GW Astronomican Grey/thinner


• Wash with 1:10 GW Fortress Grey/thinner


• Highlight 1:1 Fortress Grey/GW Skull White at 1:4 paint/thinner consistency


• Extreme edge highlight 1:4 Skull White/thinner

Dirty White:

• Basecoat 1:4 GW Kommando Khaki/GW Skull White at 1:4 paint/thinner consistency


• Shade with +2 drops of Khaki added to basecoat, with mixture at 1:4 paint/thinner consistency


• Line-in shading with +2 drops of GW Graveyard Earth, with mixture at 1:8 paint/thinner consistency


• Edge highlight 1:1 Khaki/VMC White at 1:4 paint/thinner consistency


• Extreme edge highlight +3 drops of VMC White, with mixture at 1:4 paint/thinner consistency

Pallid Purple Flesh:

• Basecoat 2:1:1 VMC Deck Tan/GW Skull White/GW Purple Ink at 1:1 paint/thinner consistency


• Layer 4:2:1 Deck Tan/Skull White/Purple Ink at 1:4 paint/thinner consistency drawn out starting roughly 1/32" from shadowed areas


• Layer 2:1 Deck Tan/Skull White +1 drop of 1:10 Purple Ink/thinner, with mixture at 1:4 paint/thinner consistency drawn out starting roughly 1/16" from shadowed areas


• Layer 2:2 Deck Tan/Skull White +1 drop of 1:10 Purple Ink/thinner, with mixture at 1:4 paint/thinner consistency drawn out starting roughly 1/8" from shadowed areas


• Wash with 1:1 GW Codex Grey/VMC Russian Uniform at 1:20 paint/thinner consistency


• Wash with 1:20 GW Liche Purple/thinner primarily in the depressions


• Layer 2:2 Deck Tan/Skull White +1 drop of 1:10 Liche Purple/thinner, with mixture at 1:4 paint/thinner consistency, over upper-facing areas


• Highlight with +1 drop of VMC White with mixture at 1:4 paint/thinner consistency blended out to about 1/32" away from top of upper-facing surfaces


• Extreme edge highlight with 2 drops of VMC White +1 drop of 1:10 Liche Purple/thinner, with mixture at 1:4 paint/thinner consistency


• Line-in extra shading with 1:10 English Uniform/thinner


• Add minimal spot highlighting of 1:4 VMC White/thinner

Dirty Claws:

• Basecoat 1:1 GW Red Gore/GW Chaos Black at 1:1 paint/thinner consistency


• Paint outward striations with VMC Buff +1 drop of 1:10 VMC Russian Uniform/thinner consistency


• Paint additional narrower striations of +1 drop VMC Deck Tan, drawn out starting roughly 1/8" from innermost claw area, with mixture at 1:4 paint/thinner consistency

This is a selection of some of the color progression recipes I've used on some of my figures. If anyone has a good color recipe that they wouldn't mind passing along and having posted for posterity, by all means leave a comment on the blog or send me an email!

Forge World Renegade Psyker WIP [Update 8/7/2009]

 I finished flocking the dust cloud on the Renegade Psyker's base after quite a few hours' worth of work last night, and it's turned out pleasantly similar to the way I had originally envisioned it looking. I'm still a little undecided on whether I need to add more in the way of projecting "flung" rock or do any tidying up of the dust cloud effect anywhere - or if I should just leave things as-is and move on to priming and painting.

Here's two pictures of the figure as he currently stands:


 I'm hoping the impression coming across is that he's causing the pavement/ground in front of him to explode outwards in something like a concussive blast or "shock wave" - I thought the "head about to explode" posture was less than inspirational, even though the figure itself is great, and decided a dynamic base might make him look less "counterproductive" if fielded with a Chaos army.

 In between finishing the flocking of the base and attempting to take photos late last night, some areas that apparently didn't have enough glue/sealant started to crumble and it seemed like every time I fixed up one faulty area another one fell apart in my hands. I ended up going nuts with extra-thin CA glue and then painting over the entire thing (with semi-thinned Future) from a jar of my standard thinner mixture. Taking a look at him this morning, everything seems to have set nicely and I'm thinking short of any minor cosmetic changes, the next step will be priming everything and then setting to work on the painting.


 Our son was born in February (the week after I joined the ranks of the unemployed masses), and has kinda precluded painting due to his schedule and limited finances. I'm rather looking forwards to painting something again. Assembling and converting figures is nice, and it's something I can easily set down in order to take care of the kids and then pick up where I left off later in the evening or even several days afterwards - but despite the hassle of mixing colors, cleaning brushes, and safeguarding works-in-progress from nosy cats, I definitely miss painting...

Hobby Tip - Something to Hold Onto

 Hopefully you all prep your figures: remove mold lines and venting tails, fill in any bubbles of missing material, tidy up any unusual molding flaws, and hopefully you all clean your figures prior to priming: a good scrub with a toothbrush or something similar under running water, using dish soap (fairy liquid) or some other suitable cleaner/degreaser/surfactant - but what happens after the painting begins? After all the work of cleaning and stripping and tidying, do you then go and get your figures - your work-in-progress - dirty again?

 One thing I've had a lot of people ask about when they see work-in-progress pictures of mine is, "What's it sitting on?"


 The short answer would be that the figure is stuck with two-sided masking tape to a 20oz. pop bottle cap. I generally find that this setup is sufficient for most figures, even metal ones. Orcus here, by Grenadier Miniatures circa 198-, is not just any metal but a good ol' solid hunk of sculpted lead - despite the weight, the tape has held him up just fine.

 The reason I stick my figures to something, and a bottle cap with two-sided heavy duty masking tape suits me fine 'cause I'm cheap 'n' easy like that, is that now I've started painting and put in all the previous prep work and cleaning, I don't want to get him dirty again by handling him and getting fingerprints, grease, and food crumbs all over him since that will interfere with paint adhering properly. I also have found that corners and sharp edges that "mysteriously" used to lose paint back when I held figures directly when working on them no longer have that problem. Whatever you use, whether it be an old paint pot with a dab of CA glue or a cork with a pinned-in base stuck through, I'd highly recommend mounting your figure to something to hold onto while painting.

 Oh, and other advantages: you can always stick your figures to something "chunky," like an old film canister or prescription bottle, if holding onto a tiny base causes hand strain; likewise, I've found that having a figure stuck to something a little more mobile that I can hold onto directly allows me the freedom to paint from just about any angle, even upside down (assuming your figure's mounted well on the base); I've also noticed reduced eye strain in mounting my figures to something while working on them - by being able to hold it up to eye height while painting, it's much easier to get better illumination of the work surface and to see tiny details.


 Anyone have any other things that they have found useful in holding or mounting a figure while painting? I'm curious about things to use for extra-large models such as tanks and monsters, although I'm thinking when I start on the Rhino for my squad of Khorne Berzerkers, a length of hardboard and some UHU Tac putty might just do the trick!

My Love/Hate Relationship With Army Painting

 Ron over at ++From the Warp++ put up a post on how to "stay motivated" when trying to paint up and finish your 40K army. He had made a request for input several weeks ago from everyone in the From the Warp Bloggers Group, for the purpose of making this particular collaborative post.

 There's a reason I didn't contribute on this one - I have great difficulty in maintaining motivation myself to finish even a 500 point force, and forever seem to get sidetracked. I've "officially" gone through 3 different races/armies (well, I'll hedge and say "at least two") in my efforts to field an army of my own on the tabletop since I got back into painting. I blame this on a number of things: limited time, easily distracted by my environment and new ideas, finding myself doing other things during time I've set aside for painting, and so forth.

 Primarily, though, I think it's my tendency to get thoroughly immersed in whatever project I happen to be working on - I put so much thinking into what I could do that I tend not to get a whole lot done. When I first got back into the hobby and figgered I wanted to play in earnest, I settled on Tau as my "army of choice" and started right in with a Battleforce set. I decided that they would be Fire Warriors from the Vior'la Sept - a group more "fiery-tempered" than most Tau and inclined towards greater numbers of warriors than other Septs. I picked a paint scheme that I thought would be "cool"... and everything went downhil from there. Not being so familiar with the hobby yet, I didn't realize that red acrylic paint generally has poor coverage; I painted with a great many color steps and to a high level of detail; I painted them in a tricky and striking "magma" scheme; and I painted each one individually, not being so familiar with "batch painting."

 Well, the squad I finished looked nice and in taking them in 2007 to my first time at the Golden Demons ever, received an Honorable Mention for them - they didn't work out quite so well as an army, though. I then moved on to Necrons with specific plans on how to speed things up - spraypainted basecoat, use of washes, etc. Silly me, I caught the conversion bug with Necrons! They're still a work in progress... Right now, I've got a collection of Orks from the Assault on Black Reach in progress and being painted up as part of the Bad Moons Clan in an "Old School" style- just 500 points' worth, and they are primarily painted with washes. I'm also working on a Chaos Warband (by way of an initial start with a converted "Shriven" renegade Guard force, now to be allies when I get back around to them with some new ideas). In trying to join in with the "500 Club" at the local GW Hobby Center, where the goal was to assemble & paint up 500 points of troops and accessories in a month, the Chaos Warband I had on the back burner while getting into the Black Reach Bad Moons sort of took preference as it seemed (logically) easier to paint up 500 points of CSM's than to paint up a slew of Boyz to total 500 points.

*raises fist and curses at the sky*
"I'll finish 500 points' worth of a fieldable army that I painted myself, eventually!!!1!1!!"


 I specifically didn't contribute to the collaborative post because I am by no means a role model or a source of advice on this one - more a poster boy for "what not to do." If prepping figures wasn't such a slog for me, maybe I'd get things done quicker, but nobody's ever seemed like they'd be inclined to file and scrape plastic on my behalf. (I'm still holding out hope, though!)


 No, there's a very good reason I seem to focus more on painting single display-quality miniatures and would preferentially accept those as commissions. I just seem to have better luck with 'em, if nothing else!